How to Make a Wooden Gate

There are some simple home projects which you do not need to go out and hire some expensive contractor or carpenter. One of these which you yourself can do is a wooden gate for your yard.

Relax, production a wooden gate all by ourselves is an inviting adventure and doesn't need to be hard or impossible. If we do all systematically it shouldn't be too hard. To build a wooden gate we need the right design for a exact purpose.

LOWES DRYWALL

In production a wooden gate ourselves the first thing we need to do is design it. This means we take exact measurements based on the width of the chance where we want to put up the gate. We also reconsider the height of the fence colse to it. all must be complementary, after all we want form and functionality, right?

Then we buy the needed wood pieces-4 by 4 inches latch and hinge posts, gate frames measuring 2 by 4 inches and picket wood pieces measuring 1 by 2 inches. These are mere suggestions; wood sizes may vary depending on our wooden gate design. We also need screws, some nails, 3 to 4 hinge sets, and the latch. The sizes and estimate of pieces depend on the size of the wooden gate.

We dig holes for the latch and hinge posts. A depth of 3 feet, more or less, ought to do. Insert one end of the posts into the holes and reinforce with rocks and earth intact at the sides to keep it from moving. Or pour concrete at the sides. Then we setup horizontal frames for the wooden gate fitting the gateway. We also fix the gate hinges enduringly to the hinge post.

Then we setup the diagonal frames. Part them to accurately fit the horizontal frames. To attach, drill holes straight through them and the horizontal frames and insert long screws. Mark spots, which are evenly spaced, allotted for the pickets. Use a square. Then attach them to the wooden gate using nails or screws at their lowest side. Two screws or nails each would do.

Finally, re-mount the wooden gate. Detach the gate to render the wood to a smooth finish and spoton fitting by scraping extra wood thickness. Then re-mount by attaching again to the hinges permanently. Make sure the wooden gate opens and closes to and from its jamb or latch post smoothly.

It is best to make the wooden gate right where we intend to setup it. This enables us to get the actual determination needed and base the wooden gate dimensions from it. Deal with carpentry tools and materials with the most care and make sure to wear fitting gloves when hammering nails, driving screws, or cutting with a saw.

Make sure all tools are in good condition, like ensuring that the chisel or plain blades are sharp. Sharp tools make the work easier and safer. Wear a carpentry apron if necessary.

It's inviting to make our own wooden gate. We can start experimenting with our orchad gate.

How to Make a Wooden Gate

LOWES DRYWALL