Steps on How to create a Shoe Rack on Your Cabinet

You like shoes; so, you have lots of it. You're curious in making a simple, yet useful shoe rack for your cabinet. Below are straightforward steps teaching you how to generate a simple, functional shoe rack for your cabinet. Two examples of racks are illustrated how an private making use of the step by step instructions could found a rack that's standard for the space ready in his/closet.

Things that you'll need:

LOWES DRYWALL

3 precut boards Rods Tape measure Securing pin Drill bits Jig Saw Step #1

Buy 3 precut boards from hardware stores, such as Lowes or Home Depot. One board will go in the middle for sustain and 2 of the boards are used for the sides. You should buy rods to place your shoes into the rods. Take note, the rods must be separate in sizes.

Step #2

Utilize a tape portion in order to see where you like to place the holes. Ensure all of the holes are equal for both sides.

Step #3

Drill holes for the rods to go over the holes.

Step #4

Put the rods in the drilled holes.

Step #5

Utilize securing pins to prevent the rods from slipping.

Step #6

2nd Design: utilize the same idea as above, but you could utilize a jig saw to cut the design. See that this shoe rack is shorter and has only 3 shelves to place shoes. Take note, the key to any kind of shoe rack is personalizing it to match your space.

Steps on How to create a Shoe Rack on Your Cabinet

LOWES DRYWALL